Para P12-45 gets PXT upgrade at Para-USA, plus a little extra service

My Para-Ordnance P12-45 finally came back from Para-USA in Pineville, NC, today, where I sent it back in early July for installation of the PXT power extractor upgrade. The PXT will hopefully solve its nasty habit of jamming occasionally. I was happy as a clam at the beginning when I bought the P12-45 which the previous owner had customized by Cylinder & Slide with ambi safeties, a new trigger and grip safety and perhaps some less-obvious changes.

But after the first 200+ rds. or more of flawless performance with FMJs and JHPs, I ran a magazine of hollow-points through for a test and she jammed. Twice! In one magazine! I cannot abide a carry pistol that is not 100% reliable, so off to Para she went for the upgrade. The PXT is internal, so there is no external difference. But hopefully the internal change will make her reliable. As President Reagan used to say, trust but verify. I'll be verifying her reliability this Saturday.

But the PXT upgrade is not the best part of what Para did while my pistol was in their shop. I sent a note along with it asking for some directions and/or advice on how to field-strip the P12 as it was a monumental pain in the posterior. With the help of a Kimber buddy, I finally got it apart by inserting a bent paper-clip in the hole in the guide rod, like a Kimber, then removing the barrel bushing with a wrench, then finally getting the recoil-spring and guide-rod assembly out so I could remove the barrel.

With the two of us working on it together and cussing frequently, it took half an hour to get it apart and another half an hour to get it back together after I cleaned it. Until then I had contented myself by cleaning the barrel while still in the slide. Getting the slide off was a snap, but getting the recoil-spring and barrel out was impossible until my Kimber buddy assisted me.

But God bless Para, the tech whose name is Jamie Woodard sent me a note explaining that in addition to the PXT, he installed an "updated recoil system... that will increase efficiency." Now all I have to do, he wrote, it take the slide stop out, remove the slide, pull up on the recoil spring and remove it and the spring plug. Then use the bushing wrench which he so thoughtfully provided to remove the barrel bushing. In 30 seconds, I was done with disassembly and happily cleaning the barrel from the breech end, as it should be done.

Then after all parts were clean and lubed, I applied some Slide Glide to the slide rails and in another 30 seconds it was all back together. I'm a mechanical klutz but even a klutz like me can take apart a more-or-less standard 1911 and put it back together. I learned how to do that in Uncle Sam's Navy back in boot camp in 1967 and thank God that got drilled in my head then. It's still there now.

Now for the acid test, does she still jam or will the PXT put an end to that problem? Time will tell.

Disassembly-reassembly of Para P12-45 monumental pain in posterior

Thanks to a friend who has Kimbers, I finally managed something Saturday I haven't been able to do since I bought a used Para-Ord P12-45 several months ago -- get the cussed recoil-spring/guide-rod assembly out.

I bought a pair of barrel-bushing wrenches. No joy.

I was talking to my friend about it and mentioned that the guide rod has a hole in it like the Ultra and Pro-size Kimber models and he suggested we try the Kimber slide-tool removal method.

So we bent a paper clip to improvise the slide tool and after about five minutes of fidding and a modicum of cussing with it, we had it apart. After cleaning and lube, it took us a half an hour and a lot of cussing to get it back together. Barrel bushing has got to be just so, the recoil-spring rear bushing has to be just so, the spring has to be just so and getting all three of those just so was a monumental pain in the posterior.

I've heard that having Para install their PXT power extractor will solve the jam problems I've had so I think that's my next step. I've contacted Para in Pineville to see what PXT installation will cost and if it's not too horrendous, I'll do it for the P12 and my P14, though I've had no problems with it. No way can I put up with what it took two of us to just to take the spring-rod assembly out of the P12 and then get it back in.

And every procedure or manual I've found to follow says nothing about a P-12 with a hole in the guide rod. We've got another one just like it at the gun shop with the same set-up, so it must be factory and not custom.

But unless I can get something done to make the P-12 more reliable than it has been, it's destined to be sold.

Remington returns to the pistol business with yet another 1911

For those who love 1911 pistols, and their numbers are legion, Remington has finally jumped back into the pistol business after an absence of eons.

Remington made 1911s under military contract during World War II, but the last handgun it made for the civilian market was in 1926, according to BlueBook.

MODEL 51 SEMI-AUTO- .32 ACP or .380 ACP cal., 8 shot (7 in mag., 1 in chamber), hard rubber 2-piece grips with company's name, black finish. Approx. 65,000 mfg. 1918-1926.

So now Remington has introduced the new model 1911 R-1, a plain Jane military throwback and launched a new website to promote it.

We haven't got one yet at the gunshop where I work but frankly I'm not exactly on pins and needles waiting for it. I'll take my 1911s with double-stack magazines and ambi safeties, thank you very much. My pair of Paras, small P12 and large P14, both customized by C&S, are about all the 1911s I want at the moment. Of course, there is that Para Carry 12 with the LDA trigger...

A love affair with .45 ACP that started more than 50 years ago

Back in the summer of 2007, I had four carry pistols and decided that was enough, Steyr MA1 .357 Sig compact 4" barrel, Glock 29 10mm subcompact 3.6" barrel, S&W 669 9mm subcompact 3.5" barrel and Kel-Tec P11 9mm 3" barrel.

So I kicked off the search for the Baddest Tactical Pistol I Can Afford. That led to the purchase of my Llama IX-C wideframe, a full-size 5" barrel 1911 .45 ACP. I busied myself collecting mags for a while, starting with the 13-rd. factory mags then discovering I could hack Para Ord P-14 mags and even larger ones, like an aftermarket 20-rd. mag.

I bought some other full-size handguns during that kick, but most of them are gone now as I zagged the other way back toward carry pistols, mainly due to starting a new job a year ago in a gun store.

Which led to my next .45, a Para P12-45 with 3.5" barrel. A retired Navy chief sold it to us and it was love at first sight for me. He was a lefty like me and had installed ambi safeties as well as several other custom features done by the famed Cylinder & Slide custom shop.

And the retired chief also sold the gun shop a full-size Para P14-45, which was customized even further by C&S, also ambi safeties and an even longer list of custom features, including a flowerpot mag well.

So what could I do? When I got the P12 paid off, I put the P14 in the layaway safe until I could buy it too. If a compact .45 is good, a full-size .45 is more good. Both are great shooters.

And that's where things stayed for a bit, but along the way I had picked up a Sig P220 Rimfire Classic. That's Sig's name for their .22LR versions of their classic P229, P226 and P220 models.

I got a chance to pick up the gently used P220 single-action-only .22LR, which has ambi safeties, voila another lefty-friendly shooter. So eventually I had to get the .45 ACP slide conversion kit for the P220.

I finally did last week and it blows me away. I can shoot this P220 .45 better than either of the other three, and they all shoot very well. Don't get much better than that, four .45s that all shoot very well to excellent.

It's been a circuitous route, but I've come back full circle to my first love, the 1911 .45 ACP my dad first let me shoot when I was a lad of 10 or so. And the 1911 .45 ACP that I shot while I was in Uncle Sam's Navy during the Vietnam War.

I've got four 9mm pistols, four .357 Sigs, one 10mm, four .22LRs, three .44s, two .357 Magnums, one .38 and one .327 Magnum, but I gotta say of all of them, I still love .45s the best.

Para Ordnance P14-45 finally comes home to stay from the gun shop

I know this sounds like blasphemy from a gun lover like me, but I may just have enough compact carry pistols and revolvers to do me for a while. So yesterday, I finally paid off the layaway balance on an honest-to-God full-size 1911-A1 .45 ACP pistol at the gun shop where I work.

It's a Para Ordnance P14-45, one of a pair of Para .45s sold to the gun shop by a retired U.S. Navy Chief Corpsman. (Most of the below is a repost from when I first shot the P14-45, but it's my blog and I can repost if I want to.)

I've been carrying and shooting the P12-45 compact .45 ACP the chief sold us for some time and it's a great piece, customized by the famous Cylinder & Slide Custom Shop with ambi safeties, a great trigger job and a host of other features.

But the chief went all out with the P14-45 full-size pistol and had Cylinder & Slide do one of their custom packages, plus a few extras not even listed in the package.

Cylinder & Slide, as the name says, specializes in cylinder guns (revolvers) and slide guns (semi-auto pistols).

The P12-45 has been heavily customized by C&S with their CST-1 package. It says so right on the right side of the slide along with the famous C&S mustache logo.

The C&S website says that package includes the following features:
Cylinder & Slide CST-I Custom Features:
# C&S Tactical Match trigger pull set 5 piece
# C&S Long Aluminum Trigger with Overtravel Stop
# Deburr breech face, radius & polish center rail
# Throat barrel and frame for reliable feeding
# Hand lapped slide to frame
# Round all external corners and edges
# Bullet nose relief on front ejection port
# Trigger Job 4.5 lbs.
# Radius and Tension Extractor
# C&S Tactical High Grip Ambidextrous Thumb Safety
# Brown High Grip Beavertail Grip Safe with Memory Groove
# C&S One Piece Recoil Spring Guide Rod
# Wolff Extra Power Recoil Spring
# C&S front sight
# Matte Reblue Pistol.

As you can see from the photos, the retired chief also had C&S install a huge magwell on the grip, which I've heard called a "flowerpot magwell."

It's certainly big enough to plant daisies in and more than big enough to facilitate fast mag changes with the handful of 15-rd. mags with big slam pads that the former owner supplied along with the pistol.

And how, you might ask, does it shoot? I've "borrowed" it several times from the layaway safe already to test-fire it. I believe as President Reagan said in "trust, but verify." When I buy a used pistol, I want to shoot it first to verify it works good.

And in the case of the P14-45, I had to verify that fact several times.

My only complaint is it shoots up those 15-rd. mags way too fast. Just when you're starting to really get in a rhythm punching .45 holes in a small group, the slide locks back. Was that 15 already? This pistol is gonna blow my ammo-hoarding plans right out the window. It's probably gonna take at least 100 rds. a week just to keep it fed and happy.

Its C&S Custom trigger feels and looks virtually identical to the P12 and with either of these great 1911 .45s the trigger is so good it overcomes my tendency as a lefty to pull my shots down and to the right a bit. With either, I punch holes right where I'm looking, dead on the money.

And the P14 has one other feature not on the CST-1 list, a BoMar adjustable rear sight, so I could adjust the sights to zero it with something other than 230-grain loads if I wanted to. But with the P12 and P14 both shooting dead-on with 230-grain loads, why mess with perfection?

Now I gotta get me a left-handed holster for my new 1911 so I can carry it on "Big Gun Day."

And the one feature the chief didn't have C&S change is the grips. I bought a set of Hogue fancy hardwood checkered grips for it, but I gotta find me a gunsmith who can customize wood grips. With the ambi safeties and the magwell, the Hogue stock P12 grips need trimming on both ends.

Amazing but true discoverery: I'm a .45 and .44 kinda guy

A funny/strange not funny ha-ha thing happened while I was in Pittsburgh for Christmas.

I went to an indoor range with some shooting buddies up there and the range rules forbid shooting at targets any closer than 25 yards, which meant running the targets all the way to the backstop.

I normally vary my distances, but mostly shoot from 7 to about 15 yards, only occasionally shooting longer distances with handguns.

So anyway, I took the Para Ord P12-45 along to show off to my Pittsburgh buddies and after they tried it out, I shot a magazine of 12 at a full-size-man silhouette target at 25 yards. All were in the black, but a few strayed out of center mass. Even though I was trying to slow down and shoot a good group to show off to my buddies, I still hurried a few shots.

That P12 trigger is so sweet it's hard to shoot slow.

Then I loaded up my Charter Bulldog Pug with 5 .44 Special Cowboy loads and shot them double-action at the same target.

You couldn't tell the .45 holes from the .44 holes, but lo and behold, there were no new holes out of center mass. Obviously, I shot all five in the "kill zone" even shooting double-action.

It certainly increased my confidence in carrying the Bulldog .44, which I did in a shoulder harness for the trip up and back, as well as my usual Kel-Tec PF-9 in my pants pocket.

And though I still love my other carry handguns, 9mm, .357 Sig and 10mm pistols and .327 Magnum, .357 Magnum/.38 Special and .44 Magnum revolvers, I got a sneaking suspicion I'm gonna be carrying the P12-45 and the Bulldog .44 as the two leaders of the pack.

I guess I knew all along I'm a .45 and .44 kinda guy, but to find I shoot those two favorite calibers as well and perhaps even better than the others certainly supports my preferences.

Charter Bulldog .44 blows away Colt Cobra .38 at the range

Does a Bulldog beat a Cobra? A funny thing happened to my plans to buy a new-to-me Colt Cobra .38 Special snubby at the gun shop.

I almost had the Cobra paid off when what should come from the last gun show? A stainless Charter Bulldog Pug 2.5" barrel .44 Special snubby.

The first snubby I ever bought is a Charter Patriot .327 Magnum, shown at right at bottom with Crimson Trace Laser Grips, so adding a Bulldog, at right top, is pretty much a no-brainer.

They're built on the same stainless-steel frame, the only difference being caliber and round count, six .327 Magnums vs. five .44 Specials in the cylinder.

I can even swap the CT grips to either of the two Charters should I want to.

But after shooting the Bulldog on Saturday at the range, I doubt it will ever wear CT grips, unless I buy a second set for it.

I started out shooting 240-gr. Cowboy Loads, rated at 761 feet per second at the muzzle. You can call that a Cowboy Load, but it sure ain't light ballistically speaking.

Those numbers are classic 230-gr. .45 ACP ballistics, which is generally about the same speed and nobody ever calls .45 ACP a "Cowboy Load."
Anything hit with a 240-grain chunk of .44 lead moving at 761 FPS is going to be in a serious load of hurt.

The Cowboy Loads were mild recoil and easy to shoot, but patterned about 3" low of the bullseye. After putting three in the same hole, I pretty well established the point-of-impact for that load.

Then I switched to some 240-gr. Semi Wad Cutter full-house loads, not marked for velocity but I'll assume about 100 fps faster, say 861. And those patterned right on the bull for the iron sights.

So that's what this Bulldog likes best, 240-gr. full-house loads. I've got both SWCs and Plated Flat-Nose 240-gr. loads so either should work just fine for carry.

I've also got some 200-gr. Gold Dot Jacketed Hollow Points but I haven't tried those yet to see where they hit. We've also got some Winchester Silvertip JHPs at the shop, so I'll probably pick up a box of those to see what the Bulldog does with them too.

But it's definitely a keeper, so I'll keep the Bulldog and let the shop have the Colt Cobra back to sell.

When it comes to whether I want a .38 or a .44 for a backup, my math skills ain't too good but not only is .44 bigger than .38, 240 grains is also heavier than 158 grains.

And I don't have to go look up the ballistic tables to know that comparing the two in foot-pounds of energy delivered is no comparison whatsoever. And IMHO, ft./lbs. is the real payoff when it comes to ballistic matchups, the closest statistic we have to the fabled "knockdown power."

If you've got speed but low grain weight, you gotta have a lotta speed to make up for that handicap to build up ft./lbs. That's how .327 Magnum is such an impressive revolver round, not much weight, 100 grains for the American Eagle load we shot Saturday, but a smoking hot speed of 1500 fps. That delivers ft./lbs. just shy of classic .357 Magnum stats.

And if you've got good weight but low speed, you come up short again. With classic .38 Special ballistics, you've got 158 grains but slow speed, so you don't get much in the way of ft./lbs. or penetration either.

But like 230-gr. .45 ACP loads, a big ol' hunk of 240-gr. .44 lead at slow speed, 761 fps, adds up to impressive ft./lbs. of energy and penetration.

So it don't take a rocket surgeon to figure out a Bulldog .44 beats a Cobra .38 every time.

I spent the rest of the day at the range playing with my Para Ordnance P12-45 with my friend Jerry and his son Austin. Nothing's more fun that shooting with friends.

I'm the old guy who needs a haircut. Jerry's the younger guy who don't need a haircut. And Austin is the kid who had enough sense to wear a knit cap on a cold, rainy day.

The rain stopped long enough to let us shoot in relative comfort, but with a high in the low 40s, it was a bit brisk, as least for this thin-blooded ol' Southern redneck.
Austin also has a cool phone with a multi-exposure photo function and he took a series of photos of me working on my shoulder-holster draw and double-tap shooting. Thanks Austin.

Humility Day: Double-Tap 2 Bad Guys Drill at range with carry pair

Got a couple of hours of range time Saturday and started off with some forgotten fun, shooting a .22LR rifle.

I bought a Marlin-Redfield Model 75 carbine a while back because I had one just like it several years ago and really loved shooting it. I gave it to my son after he got grown and gone.

We had one like it marked down for clearance at the shop so I bought it because it was cheap.

Alas, I discovered my fuzzy eyes could no longer get the iron sights focused and aligned, the latter due to the Monte Carlo stock.

I bought the earlier Marlin carbine with a scope already on it so it never occurred to me I'd have a lefty alignment problem.

But Saturday morning I finally got around to mounting a Simmons 4X scope on it that had been gathering dust on my shelf for more than a year. So I started off the range trip with zeroing the scope.

The scope was so far out of zero I had to break out one of my few Blue Man full-size target to get the shots where I could find them.

Then since I already had the Blue Man out, I decided to invent a new drill to simulate two idiots who might try to rob the gun store.

Believe it or else, this actually happened a while back but they changed their minds about it quickly when confronted with a Glock .40.

So I set up a smaller black bull offset to the left of the Blue Man target, which simulates a second BG some distance behind the first BG.

I had already planned to do some draw and shoot practice drills with two shoulder rigs for my two favorite carry pistols, my Sig P229 SAS Gen2 .357 Sig and my Para Ord P12-45.

I drew and fired double-taps at each target as quickly as I could get the sights aligned, sorta practicing "panic mode" as in a genuine armed robbery attempt.

I wore the Bianchi rig for the P229 so I started off with it. I knew the long double-action pull of the first shot would likely adversely affect the first shot.

What I wasn't prepared for was the single-action shots at the second target also missing an equal amount of time. Shazzaam! as Gomer Pyle would say.

After the first round of 3 mags of 12, I had 12 holes in the blue man, 12 holes in the black bull and 12 holes off either target.

As the King James says, that sucketh. Can't blame that on the DA pull for the first shot.

So I put up a fresh set of targets and strapped on my Para 12-45 with its Galco leather shoulder harness rig.

After four mags of .45 ACP, one 12, one 14 and two 15s, I had only a very few holes out of the blue or black.

Conclusion: nothing beats a great single-action trigger in a 1911 pistol, not even the great DA/SA SRT Short-Reset Trigger in P229 SAS Gen2.

I think I'll be practicing more with my pair of Sig P229 .357 Sig pistols and carrying my Para P12-45 a lot more until I can improve my P229 shooting.

Nothing like a little simulated "panic mode" pistol shooting to remind me I ain't near as good as I think I am. More range time needed.

Then I finished off the day with a little double-action revolver shooting with my two backups, Charter .327 Magnum and S&W 65-3 .357 Magnum. The Charter with Crimson Trace Lasergrips is definitely a hand cannon as it's nearly the equal of the .357 Magnum in ballistics.

It's at least a slight insult to call either of these powerful wheel guns a backup, but until I get the Colt Cobra .38 in the layaway safe paid off, they'll have to assume that lesser role. When the Cobra is ready for action, I'll work out some other combo with the two magnums in lead roles.

Para P12-45, Colt Cobra .38 and S&W 65-3 .357 Mag. showoff time

In the spirit of "It's my blog and I can show off if I want to" I finally got around to taking some new photos of my latest carry pieces yesterday, so here they are.

My new-to-me Para Ordnance P12-45 is first up, along with the Galco shoulder harness with double-mag holder which was purchased along with the pistol from the former owner, a retired Navy chief corpsman.

The P12 has several custom features, including ambi thumb safeties and a 3-hole adjustable trigger, which I presume was done by Cylinder & Slide since that shop also customized the chief's former P14-45, which I'm in the process of purchasing also.

I didn't appreciate the customization fully until I tried to order a set of wood grips and discovered that stock P12 grips are not fitted for ambi safeties, like mine. So either I find somebody who can custom fit some grips or just stick with the black Para grips that have already been custom fitted to the pistol. Probably the latter.

Then there's my new-to-me Colt Cobra .38 Special snubby, which is almost paid off. I took the liberty of finding some new grips for it after discovering the painful truth that the original grips fit too high and the back of the trigger guard raps your knuckle when you shoot it.

I have test-fired it with a new set of wood grips, shown installed, and they work fine. Also got a set of rubber grips which I haven't tested yet, but I suspect I'll stick with the new wood grips. I'll be carrying it with my small-of-back Galco holster, belt holsters or a new Bianchi shoulder rig, shown with the Colt.

My Colt Cobra, according to Bluebook, was made sometime prior to 1972.

COBRA (FIRST ISSUE)- .22 LR, .32 Colt NP, .38 Colt NP, or .38 Spl. cal., first issue, 2, 3, or 4 (square butt on early model, later models had round butt) in. barrel, blue or nickel finish, similar to Detective Special, only alloy frame and available in .22 LR, very early guns had plastic grips with silver medallions, changed to plastic w/o medallions, and finally changed to wood grips. Mfg. 1950-72.

It has a square-butt frame, which makes it an early model, but it came with wood grips, which makes it a later model? Go figure. It's old, that I know for sure, and it has a great trigger so it will be a fine backup carry piece. Plus it's a D-Frame Colt, same size as a K-Frame S&W, so it's a 6-shooter, not a 5-shooter, like the Smith J-Frames. I'm math challenged, but I am pretty sure 6 shots in a snubby beats 5 shots.

And last but certainly not least is my new-to-me Smith and Wesson 65-3 with 3" barrel, a great set of grips and a custom trigger job from the S&W Performance Center.

Bluebook says this about it: MODEL 65- .357 Mag. cal., stainless version of Model 13, K-frame, has 3 (round butt, disc. 2000) or 4 (square butt) in. heavy barrels, satin stainless steel, current production uses Uncle Mike's grips, fixed sights, 35 oz. Disc. 2004.

The grips may be the "smooth Dymondwood combat grips" which Bluebook says came on the Model 65 Ladysmith. Whatever they are, they fit my hand perfect and shoot great. I love the 3" barrel, which carries great and shoots great too. I have learned that shooting really hot .357 Magnum loads, like 180-grain Cor-Bon, is not a good idea with a K-Frame. Save those for your N-Frame Smiths. It shoots just fine with 110-grain .357 Magnum loads, which are more than adequate to stop anything short of a charging rhinoceros.

So long EAA Witness P-Carry, hello Para Ord P12-45

Tomorrow is my first Para Ordnance carry day! The Good Lord sent me a buyer for my EAA Witness P-Compact .38 Super/.45 ACP at the gun show in Hickory over the weekend, attended by the other folks at the gun shop where I work. So far I've been able to get away with not spending my weekends at gun shows with the rest of the crew.

That enabled me to get my new-to-me Para Ordnance P12-45 out of hock at the gun shop today and bring her home for good. So tomorrow I'll be carrying the Para and 12+1 rds. of Winchester PDX1 230-gr. JHP Bonded Personal Protection loads, plus a couple of spare magazines of 12 and a backup piece.

I shot the Para P12-45 again this past Saturday at the range and she just loves those 230-grain loads with the sights dead-on at 15 yards. She has a Cylinder & Slide trigger job and some other custom touches, including ambi safeties which makes her perfect for a lefty like me.

I also got my Charter Arms Patriot .327 Magnum back from a gunsmith at the Hickory show, so that will be my backup tomorrow. The gunsmith tried unsuccessfully to install a lighter weight hammer/trigger spring, but said he couldn't find one that would also fire cartridges of any type. That's sorta essential for a firearm, that it actually fires, certainly more important than a lighter trigger pull.

Speaking of lighter trigger pull, I've been carrying my new-to-me Smith & Wesson Model 65-3 stainless .357 Magnum revolver lately, second photo. This little 3" barrel darling has a trigger job from the S&W Performance Center that has to be felt to be believed. Everybody who has tried that trigger has had a shocked expression and a mouth that falls open. It's that good. I guess one great trigger job is enough for the moment.

I got enough from the EAA sale to pay off the Para Ord and also make a down payment on my next acquisition, a Colt Cobra .38 Special 6-shot snubby, third photo.

The Cobra is the same frame size as the Smith 65-3, K-Frame for S&W and D-Frame for Colt. It's a dead ringer for the famed Colt Detective Special, the only difference being an alloy frame vs. the all-steel Dick Tracy snubby. I've got nothing against light carry pieces if they shoot good.

And the Colt Cobra shot just fine when I took her for a test run this past Saturday. She has a good trigger and she's a 6-shot vs. the usual 5-shot J-Frame Smith snubbies, plus the grip is also a bit bigger which works well for my large, long-fingered hands.

And the Colt Cobra trigger is pretty slick too, not as slick as the Smith 65-3 but definitely better than the Charter Patriot .327 Magnum. It's destined to be my everyday backup carry piece.

My only caveat at the range was the discovery that hot .38 Special loads banged the back of the trigger guard on the knuckle of my middle finger no matter how I tried to adjust my grip. I'm gonna find some of those grip fillers for the front of the grip frame that will fit a D-Frame Colt.

Singin' the Single-Action, Double-Action Boogie Woogie

What's better than a great single-action trigger? Only a great double-action trigger, and I have found both and experienced both in a single day.

After my concealed-carry class yesterday, I got my first chance to take my two newest-to-me handguns for a test run and both passed with flying colors. As if they wouldn't. But you never really know how sweet a handgun really is until you shoot it. At left is my new-to-me Smith & Wesson 65-3, a stainless-steel double-action .357 Magnum with 3" barrel, and at right is my new-to-me Para Ordnance 12-45, a 3.5" barrel 1911 .45 ACP semi-auto with a single-action trigger to die for.

The gentleman who sold us the used Para Ord has sent it off to Cylinder & Slide for a trigger job and who knows what else. It has ambi safeties for one, which I'm pretty sure a stock Para 12-45 doesn't have, but the P 12-45 is discontinued, so I can't look it up on the Para Ord website.

It certainly passed the live fire test with the toughest drill I could conjure up. I loaded one of it's 12-rd. mags with a mixture of four different JHPs, two different Winchester 230-grain loads, a Federal 180-grain HydraShok load and some Remington Golden Saber 230-grainers.

The Para Ord munched through that mixed bag like it was its regular diet without a single hiccup. And the single-action trigger can't be more than 3 lbs. or so, but my Lyman Digital Trigger Gauge went tango-uniform some time ago, so I just have to guess about the weight.

And the great double-action trigger? I would have said before I first held the S&W 65-3 there is no way I would ever pull a DA trigger better than the S&W 14-3 K-38 Target Masterpiece .38 Special I purchased from the shop a while back. And then I pulled the 65-3 trigger.

The guy who sold it to us said he sent it to the S&W Performance Center for a trigger job and I believe it. This trigger is so smooth you fall off your chair when you pull it. Add to that a set of finger-groove combat grips that fit my hand like a glove and it was love at first trigger pull.

For you non-Smith lovers, the 65-3 is a stainless version of the S&W Model 13, a blue-steel beefed-up Model 10 K-Frame. Any Smith revolver starting with a 6 is stainless steel. The 65-3 with it's heavy barrel is the 357 Magnum version of the Model 10 .38 Special, the original Military & Police revolver carried by lawmen for nigh unto seven or eight decades.

And this particular Smith 65-3 with 3" barrel is the first such barrel length I've ever shot and I gotta say, three inches is just right for balance and point shooting. The fixed sights are dead on with a Duke's mixture of .357 Magnums and .38 Special +P loads I tried in it, four total.

I'm in love again and this time it's with a great single-action trigger and a great double-action one. For a gun nut like me, it just hardly don't get no better than this.

Fell in love with two new sweethearts at the gun shop

I've done fell in love again with not just one but two new "sweethearts" among the used guns either traded or sold to the gun shop where I work. First along came a Smith & Wesson 65-3 Stainless .357 Magnum revolver with a trigger job from the S&W Performance Center, 3" barrel and a set of black wood fingergroove combat grips that fit my hand just perfectly. That trigger is so smooth I fell in love instantly with the first pull. Right into the layaway safe it went until I can get it paid off.

Believe it or else, I haven't owned a .357 Magnum or .38 Special revolver since I sold my S&W 19 some three years ago. No self-respecting gun nut can possibly live without at least one .357 Magnum or .38 Special revolver. That's wrote on the wall somewhere.

Then yesterday, a gent sold us a whole passel of high-dollar guns, including a Para 12-45 with a trigger job from Cylinder & Slide. One test of that trigger and it was love at first pull again. Now I gotta sell something to raise the cash for the Para 12. My EAA .38 Super/.45 ACP is going on gunbroker as soon as I can find the time to take photos and list it. That's it in the photo with the .38 Super slide in Wonder finish on it.

I've decided to call that adventure a failure. I acquired it in a trade as an EAA Witness P-Compact .45 ACP. I didn't care for the snappy way it shot with .45 ACP, that polymer frame just can't handle the recoil very well. So I bought a .38 Super slide assembly and three 12-rd. mags, upgraded the trigger from milled-face to smooth-face and added ambi safeties.

But which would I rather have, an EAA in a weird caliber that's hard to find ammo for and won't shoot .45 ACP well plus only 8 rds. in a mag, or a Para 12-45 with a great trigger job? Mama didn't raise no fools and that decision is foolproof. I like .38 Super, but I love .45 ACP and I don't have a carry pistol in that caliber. I've got a full-size double-stack Llama IX-C that shoots great and holds 15 rounds of .45 ACP, plus a newly acquired Sig P220 .22LR that will get an upgrade with a .45 ACP slide assembly when I get the cash. But neither of those is a carry .45 pistol.

But a compact 12-rd. Para Ordnance .45 ACP has been on my gotta-have list for quite some time before this perfect condition used one showed up. The Witness .38 Super/.45 ACP is outta here.

In the meantime, I'll add that Para 12-45 to the layaway safe until I can raise the cash.